POC Otocon Gopro Top Mount

Features a low-profile design, and perfectly matches the helmet curvature to ensure a solid attachement.

3M VHB Tape included.

3M VHB INSTALL INSTRUCTIONS:

1. Use the included alcohol pad to clean your helmet. Allow to dry completely.
2. Remove the red adhesive backing.
3. Carefully apply some heat to both your helmet, and the adhesive using a hairdryer or heat gun on low setting. (Aim to get the surfaces around 40° C.)
4. Place the mount on your helmet (refer to listing photo for proper orientation) and press firmly for 15 - 20 seconds.
5. Allow the adhesive to cure for 24hrs, then go shred!